Google
Archive
Data
Thursday
Dec032009

Fastest Log and Transfer - My favorite P2 Card Reader

Like many of us for the past couple of years most of my work has been moving to a tapeless nature. I use to say "Friends don't let friends EDIT tape", these days I say, "Friends don't let friends SHOOT tape". 

In the San Francisco Bay Area P2 is a pretty dominate format, there are many Panasonic HDX 900's around and a lot of guys use the HVX-200 and with the totally tapess HVX-170, we really are beginning to see the end of tape as a production medium.

Now we just have to deal with the data and there is clearly a lack of good options when it comes to good P2 Readers.

First the bad options... 

Horrible option number 1, and I DO MEAN horrible the Duel Adapter. This thing is an express card slot adapter that slides into a MacBook Pro with an express card slot and it has a dongle that hangs out of the computer that is on a cable that is CLEARLY too stiff and the dumb thing doesn't work for me more then half the time. More often then not, to get data from the card I ditch the thing and just put the camera on the desk and use it as a reader thru firewire 400... I basically refuse to use them. (I won't EVEN go into all the times it causes the whole system to go down, I mean full fledged kernal panics... ARG!!!!

Good Option but Costy??? the Panasonic AJ-PCD20. OK so, this is a great device but...

1. Costy, nearly $2,000 
2. You have to plug it in to the wall. Not bus powered.

As it turns out this is not a trivial task to make a bus powered P2 reader, that is why no one has done it yet.  The PCD20 is pretty fast because its FW-800 but you have to carry it around with a computer to do your tranfers... and its not to small either. Don't get me wrong it's not like carrying a desktop around (there ARE people that put P2 readers in desktop machines but thats not practical to carry in the field.  

So what is MY choice? This past week I tried something new (to me) and LOVED it. As it turns out you just have to go back in time a bit.  Check Craigslist and pick yourself up an older Powerbook G4.  Yea, it has to be an aluminum one and what you'll find is that,

1. It has a PCMCIA card slot
2. It has FW800 and... 
3. It has gigabit ethernet. 

PCMCIA, the worst acronym in the history of the computer industry. I'm not sure but I think it means "People Can't Remember Computer Industry Acronyms"... I could be wrong. As it turns out, the PCMCIA slot IS a P2 Slot. You'll have to go get yourself a driver to read the card. You should be able to find it here.

Once you have the driver all you have to do is put the card in the PCMCIA slot on the old PowerBook and then you can copy your contents off the card to a small pocket FW800 drive of your choice and create a folder called something like "Card 1" and copy the ENTIRE CONTENTS of the card into that folder on your external drive. its important to use a bus powered drive that way when the electric department pulls your power you aren't HOSED.

My choice for drives are either the G-Tech G-Raid Mini or the Lacie Rugged orange things. The G-Tech has a slight advantage because it has a second FW800 port for looping drives but the PowerBook FW port probably won't supply enough voltage to run both drives reliably.

At this point this post is over. But I want to go into some more details about why this machine is a confluence of good features.

Gigabit Ethernet and File Transfers

Here's what we know. A LOT of people do video editing off of FW800 drives... all the time. Often times there is a need to transfer files, large files and sometimes a LOT of them via FW800 from one drive to another. Take a look at the typical file transfer setup.

For the sake of this graphic I've used our new favorite Late 2003 PowerBook, I am not advocating the use of this computer for anything BUT the transfer of the data. It does not have the "giddy-up" to actually play most of these files well.

If you need to transfer data from one drive to the other we often think that because they are connected via FW800 that the transfer rate will be... uh, 800 "something or others". What we fail to realize is that when data goes from one drive to the other it actually has to first go across the mother board in the CPU. So assuming you are copying data between Drive 1 to Drive 2 the Data has half of the FW800 bandwidth to go from Drive 1 to the Computer, then half of the connection between the Computer to Drive 1 and all of the bandwidth between drive 1 and Drive 2. However, since the connection is only as good as the weakest link the effective speed is half of FW800 or roughly equal to FW400. Ouch… that sucks.

So if you want to move data FAST, this is a much better setup. Use two computers and wire a gigabit switch between them. To move data between Drive 1 and Drive 2 we have the full FW800 bandwidth to computer 1, we have a gigabit connection between Computer 1 and Computer 2 and we have the full FW800 connection to Drive 2. No data has to move on any one cable in BOTH directions. Quite literally, if you do this experiment yourself you will see your data transfer rates be TWICE as fast.

Gigabit Ethernet and Video Production

So now lets take this one step further and build a multi station edit system. Because our trusty 2003 Powerbook came with gigabit ethernet we can use it as our main ingest station and both edit systems can actually transcode the raw MXF data from the media that is stored on the MXF Archive drive. 

After doing some experiments I found that doing my Log and Transfer in FCP across this network actually went about 25% faster than if the MXF data was stored on the same drive that I was using as my Capture Scratch in FCP. There is also an added benefit in that, because of the way you've setup your stuff… you will automatically have two copies of your data on two different drives, at the end of the day. One in its RAW MXF form and one as MOV files in your Capture Scratch. Thats COOL.

UPDATE:

Panasonic just released the AJ-PCD2. Its a bus powered P2 card reader that uses USB2. Not sure how fast it is but by my estimations the PowerBook and gigabit ethernet method above should be faster.

Looks like it will be out in April and go for about $350. I bet you can get a used PowerBook on Craigslist for that.

Wednesday
Dec022009

If its official on Facebook...


Twittering Your Wedding - Watch more Funny Videos

If its official on Facebook then it must be official in my book... couples takes the time to update their Facebook status during the wedding ceremony.

Sunday
Nov292009

Great Time Lapse! U2 360 Tour

I wonder how many days it takes to build "The Claw"? Does anyone have a good link to a story about the behind the scenes construction of it?

Sunday
Nov292009

People who are not me...

OK, I've done the ultimate vanity search and have come up with a few images of people that are definitely NOT me.

This is not me. Photo (the guy on the left)

I'm not in "Sing for your Seniors". Photo

I'm not in the City Council. Photo

I'm not a conductor. Photo

and

I'm not involved in Dr. Feelgood. Photo

Friday
Nov272009

Most "Swine Flu" is NOT... According to CDC, They just don't want you to know that.

You should really listen to this woman's interview.

"Sharyl Attkisson is a CBS News correspondent and investigative reporter. She’s covered Capitol Hill since February 2006 and has been a Washington-based correspondent there since January 1995. She was also part of the CBS news team that received the Edward Murrow Award in 2005 for overall excellence. Additionally, she received an Outstanding Investigative Journalism Emmy in 2002 for a series on the Red Cross."

"In case you didn't realize it, Sharyl Attkisson is the investigative reporter behind the groundbreaking CBS News study that found H1N1 flu cases are NOT as prevalent as feared."

"In fact, they’re barely on the radar screen."

"How did this startling information come about, and why is the U.S. Centers for Disease Control and Prevention (CDC) painting a different picture entirely? I spoke directly with Sharyl Attkisson to find out."

 - From mercola.com